cleanup

test.py

@@ -1,50 +0,0 @@
-import spidev
-import time
-
-cc2500_config = {
-    0x00: 0x0B,  # IOCFG2
-    0x02: 0x06,  # IOCFG0
-    0x03: 0x00,  # FIFOTHR
-    0x07: 0x08,  # FSCTRL1
-    0x08: 0x00,  # FSCTRL0
-    0x0B: 0x06,  # IOCFG0 (repeating correct setting)
-    0x0C: 0x00,  # FIFOTHR
-    0x0D: 0x5D,  # FREQ2
-    0x0E: 0x93,  # FREQ1
-    0x0F: 0xB1,  # FREQ0
-    0x10: 0x2D,  # MDMCFG4
-    0x11: 0x3B,  # MDMCFG3
-    0x12: 0x73,  # MDMCFG2
-    0x15: 0x00,  # DEVIATN
-    0x18: 0x18,  # MCSM0
-    0x19: 0x1D,  # FOCCFG
-    0x1A: 0x1C,  # BSCFG
-    0x1B: 0xC7,  # AGCCTRL2
-    0x22: 0x11,  # FREND0
-    0x23: 0xE9,  # FSCAL3
-    0x24: 0x2A,  # FSCAL2
-    0x25: 0x00,  # FSCAL1
-    0x26: 0x1F,  # FSCAL0
-    0x2C: 0x81,  # TEST2
-    0x2D: 0x35,  # TEST1
-    0x2E: 0x09,  # TEST0
-    0x06: 0x00,  # ADDR (only once)
-    0x1E: 0x05,  # PKTCTRL0
-    0x07: 0x00,  # CHANNR
-}
-
-
-spi = spidev.SpiDev()
-spi.open(0, 0)  # Bus 0, CE0
-spi.max_speed_hz = 500000  # Adjust if needed
-spi.mode = 0  # CC2500 usually works in SPI mode 0
-
-def cc2500_strobe(command):
-    resp = spi.xfer2([command])
-    return resp[0]
-
-SRES = 0x30  # Reset strobe command
-
-print("Sending reset to CC2500...")
-status = cc2500_strobe(SRES)
-print(f"Status byte: 0x{status:02X}")