main.py

@@ -3,8 +3,8 @@ from util import *
 from receive import receive_packet
 
 debug = True
-GDO0_PIN=23, 
-GDO2_PIN=24
+GDO0_PIN=17
+GDO2_PIN=27
 
 def menu():
     print("\nMenu")
@@ -13,6 +13,7 @@ def menu():
     print("3: Dump registers")
     print("4: Poll for packets")
     print("5: Run Read+Write test")
+    print("6: Print GDO state")
     print("0: Quit")
 
 
@@ -78,6 +79,8 @@ if __name__ == "__main__":
             elif cmd == 5:
                 res = test_read_write_reg(spi, True)
                 print("Test result : "+str(res))
+            elif cmd == 6:
+                print_gdo_state(GDO0_PIN, GDO2_PIN)
             else:
                 print("Invalid command")
     finally:

util.py

@@ -13,7 +13,7 @@ SNOP = STROBES["SNOP"]
 VERSION = STATUS["VERSION"]
 MARCSTATE = STATUS["MARCSTATE"]
 
-def init_gpio(GDO0_PIN=23, GDO2_PIN=24):
+def init_gpio(GDO0_PIN=17, GDO2_PIN=27):
     # Use BCM numbering
     GPIO.setmode(GPIO.BCM)
 
@@ -22,20 +22,13 @@ def init_gpio(GDO0_PIN=23, GDO2_PIN=24):
     # GPIO.setup(GDO2_PIN, GPIO.IN)
     GPIO.setup(GDO0_PIN, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
     GPIO.setup(GDO2_PIN, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
+    sleep(0.1)
 
 
-# def clear_csn():
-#     CSN_PIN = 8  # CE0 = GPIO8 (Pin 24)
-#     GPIO.setmode(GPIO.BCM)
-#     GPIO.setup(CSN_PIN, GPIO.OUT)
-#     sleep(0.1)
-#     GPIO.output(CSN_PIN, GPIO.HIGH)
-#     sleep(0.1)
-
-def print_gdo_state(GDO0_PIN=23, GDO2_PIN=24):
-    gdo0 = GPIO.input(23)  # Reads 1 or 0
-    gdo2 = GPIO.input(24)
-    print(f"GDO0 (GPIO23): {gdo0}, GDO2 (GPIO24): {gdo2}")
+def print_gdo_state(GDO0_PIN=17, GDO2_PIN=27):
+    gdo0 = GPIO.input(GDO0_PIN)  # Reads 1 or 0
+    gdo2 = GPIO.input(GDO2_PIN)
+    print(f"GDO0 (GPIO{GDO0_PIN}): {gdo0}, GDO2 (GPIO{GDO2_PIN}): {gdo2}")
     sleep(0.1)